The capping machine is also called capping machine, capping machine or capping machine. Its main purpose is to tighten and loosen the caps of plastic bottles and glass bottles. The capping machine is widely used and is a very common packaging machine. It is usually used in conjunction with a tablet counting machine.
With the gradual strictness of market packaging and the gradual diversification of packaging styles, people have also put forward higher requirements for the capping machine, and the pressure of the capping machine has strict sizes, from simple manual capping to mechanical Automatic capping, high, medium, and low-end products of different levels meet the needs of different capping customers. Screw caps on bottles of different materials.
The general problems and solutions in the work of the capping machine can refer to the following items:
1. Automatic switch failure caused by the movement of micro switch or photoelectric switch. If such failure occurs, you can adjust the working position of the position switch or photoelectric switch, or exchange the switch.
2. The short circuit of the electric stage winding and the casing and the short circuit of the electric idea connection and the grounding wire cause no extra current. This fault can check the motor on the one hand, and check whether the related wires are loose.
3. The acceleration time of the automatic capping machine is too short and the electric shock capacity exceeds the capacity of the inverter. If the acceleration time is caused by the overcurrent fault, the F001 value setting time can be appropriately extended, and the capacity of the electric idea cannot be changed at will.
4. The excessive voltage during operation caused by the excessive change of the power supply voltage can be easily solved by adding a reactor or appropriately reducing the power supply voltage.