Home > News > Content

Cleaning Steps Of Automatic Hard Capsule Filling Machine

Jan 14, 2020

Cleaning Steps of Automatic Hard Capsule Filling Machine


1、Cleaning steps for the production of the same variety:

(1) Vacuum cleaner and then use a soft brush to clean the residual powder in the powder filling device module;

(2) Remove the powder punching rod, metering plate and powder hopper, and take it to the cleaning room, rinse with drinking water once, then rinse with purified water and dry with dry cloth. Wipe and disinfect with a rag dipped in 75% ethanol;

(3) The equipment part in direct contact with the medicine is cleaned with purified water, then dried with a dry rag, wipe and disinfect with a rag dipped in 75% ethanol;

(4)The glass shield and the surface of the equipment are cleaned with purified water;

(5) Clean the site, after passing the inspection, hang the "cleaned" status mark ";

(6)Fill in the cleaning record. 

2、(1) Remove the capsule barrel and the capsule funnel, take it to the cleaning room, rinse it with purified water, dry it with a dry dishcloth, and finally wipe it with a dishcloth dipped in 75% ethanol. Scrub the movable support with a dishcloth, then scrub it with purified water, dry it with a dry dishcloth, and finally wipe it with a dishcloth dipped in 75% ethanol.