The structure of the tablet press with special requirements is also targeted, and it is necessary to pay attention to some things in the use. The structure and application requirements of the special-shaped die press: if the tablet is constrained by the special-shaped die, the die is There are certain positioning requirements, such as square, triangle, oval and other shapes.
The upper punch of the turntable of the tablet press has requirements on the structure of the tablet press. The requirement to advance on the die is because the upper punch needs to have a directional key, which is compatible with the upper punch of the turntable during the equipment process.
The lower punch of the tablet press does not leave the middle die hole during the operation process, and no other processing is required. Using a special-shaped die to constrain the tablet punch can’t roll freely. Instead, it moves up and down along the upper and lower guide rails. When the turntable is driven, the punch and guide rails slide and friction, so that the punch and guide rails wear out.
Therefore, when we use them, we must pay attention to the smoothness, and remember to do maintenance in our daily work. We must be punctual to check whether there is looseness and wear. The affected time and the punch and the middle mold cannot be operated. of.