The framework of the aluminum-plastic bubble wrap packaging machine mainly includes a frame, preheating forming device, pneumatic device, feeding and filling device, PVC film unwinding and testing device, heat sealing device, conveyor, punching and forming and other mechanical devices; The temperature control part is composed of thermocouple and temperature inspection extension module, and the electrical control device of the whole machine is composed of PLC and touch screen. The outer cover plate is made of stainless steel plate, and the material in contact with the medicine is made of high-quality stainless steel, so as to meet the requirements of beauty and health.
blister packing machine to keep clean, often wipe, lubrication rotating parts.
The CAM mechanism and transmission chain parts of the automatic blister packaging machine shall be lubricated every 15-40 working hours. It is recommended to use mechanical oil of grade 50 and to add grease every three months for gear meshing. Calcium base grease is recommended.
The filter screen of the glue machine and the filter screen of the gun seat should be cleaned regularly. The filter screen of the glue machine should be cleaned once every 3 to 4 months after 8 hours. Please close the pressure of the glue machine before cleaning.
Synchronous toothed belt and transmission belt should avoid contact with oil, so as not to reduce its service life.
To ensure the normal and reliable work of the packaging function, the machine should be shut down every three months to check the tensioning of the transmission chain and the fastening degree of the transmission parts, and adjust and tighten again when necessary.
Regular maintenance of automatic blister packaging machine can also reduce the number of maintenance of the machine, in order to prevent the occurrence of failure and preventive maintenance, maintenance prevention, routine maintenance, maintenance improvement and other work is also indispensable.