Material is an indispensable part of the pharmaceutical process, the mill must be properly maintained and maintained.
1. The production process, it is necessary to check the temperature of the bearing, can when temperature rises more than 50 ℃ water pipe cooling bearing. When the temperature rises to 90 ℃, should stop check and find out the reason and troubleshooting.
2. When the new machine is running, the driving belt is easy to stretch, and the belt should be adjusted properly to ensure the working life of the belt.
3. The vulnerable parts should be checked frequently and replaced in time to ensure production quality and production capacity.
4. Blade, always check the wear condition, if after wear, the productivity drops, the size of the coarser find the wear and replace.
5. The main engine rolling bearings are grease lubrication with 2 white special fat needle penetration 265-295 degrees.
6. The grease change period of the bearing is 2000 hours, and the filling amount of the grease is the half of the space in the bearing cavity. The grease can not be filled too much or it will cause the bearing temperature to be too high.